All set with the rondobox

The rondobox contains a complete set with both rondo-system rondoplex 400 and rondoplex 600.

This ready-to-work kit allows you to start instantly with your repair work on shuttering.

rondobox contains:

  • One electric hand router including accessories (Art. No. 9000)
  • HM switchblade cylinderhead drill bit 40.1 mm diameter for rondoplex 40.2 mm repair discs (Art. No. 400 W)
  • HM switchblade cylinderhead drill bit 60.1 mm diameter for rondoplex 60.2 mm repair discs (Art. No. 600 W)
  • 500 rondoplex repair discs 40.20 mm diameter
  • 300 rondoplex repair discs 60.20 mm diameter
  • 2 HM Switchblades for cylinderhead drill bit 40.1 mm diameter (Art. No. 400 RPL)
  • 2 HM Switchblades for cylinderhead drill bit 60.1 mm diameter (Art. No. 600 RPL)
  • 4 HM side cutters (Art. No. 4/600 WPLV)
  • 1 VHM centrepole (Art. No. 4/600 ZSP)
  • 1 Torx screwdriver, large (Art. No. 4/600 SCHDG)
  • 1 Torx screwdriver, small (Art. No. 4/600 SCHDK)
  • Screwdriver, large (Art. No. 4/600 SCHDM)
  • 1 D-3 glue, bottle with 600 g (Art. No. 600 WL)
  • 1 resin remover, can with 1 l (Art. No. 600 HL)
  • Steel box (Art. No. 4/600 BK)


rondobox with rondoplan set
 

rondobox complete solution with rondoplan repairing strips

The rondobox contains a complete set with both rondo-system rondoplan 150 and rondoplan 200.
This ready-to-work kit allows you to start instantly with your repair work on shuttering.

rondoplan set contains:

  • One electric hand router including accessories (Art. No. 9000) with rondogriff handles
  • Aluminum template for heavy duty plunge router, including distance parts for 100, 150, and 200 mm rondoplan repair strip 12 mm collet
  • HM switchblade groover (Art.No. 301 W2)
  • HM switchblade15x12x1,5 mm, 10 pieces/box (Art. No. 3011512)
  • HM switchblade12x12x1,5 mm, 10 pieces/box (Art. No. 4011212)
  • 100 rondoplan plywood repair strip, phenolic resin film brown, 100,00 x 30,20 mm (Art. No. 1003042)
  • 100 rondoplan plywood repair strip, phenolic resin film brown, 150,00 x 30,20 mm (Art. No. 1503042)
  • 100 rondoplan plywood repair strip, phenolic resin film brown, 200,00 x 30,20 mm (Art. No. 2003042)
  • 1 Anti-slip coating  (Art. No. 910500)
  • 1 rondoglue high performance waterproof white glue for rondoplan (Art. No. 600 WL)
  • 1 resin remover, can with 1 l (Art. No. 600 HL
  • 1 Torx screwdriver, large (Art. No. 4/600 SCHDG)
  • 1 rondo-screwdriver, large (Art. No. 4/600 SCHDM)
  • 2 allen key for assembly

rondoplex repair steps

Step 01

Before repairing the damaged spots, the shuttering has to be cleaned of concrete and dirt with the appropriate tools and aids.

Step 02

The Router with rondo HM-switchblade cylinderhead drill must be adjusted to the corresponding thickness of the rondoplex plywood repair discs at the depth regulator of the machine. Do a testrun on old shuttering. After the adjustment of the drilling depth and a testrun, drill the hole on the damaged spot and turn off the machine.

Step 03

Blow away shavings and dust.

Step 04

Apply D3 or PU glue sparingly at the inside wall of the hole.

Step 05

Put a rondoplex-plywood-repair disc in the hole

Step 06

Fit in lightly with a hammer. Caution! Avoid damage of the filmcoating due to hard hits with the hammer.

Use a piece of hardwood or plywood to fit in the rondoplex-plywood repair disc level. Long scratches and grooves can be repaired by putting in several rondoplex-plywood repair discs overlappingly. In this case, each rondoplex-plywood repair disc must be fitted exactly before putting in the next one overlapping. Working as described, even large damage can be repaired.

Step 07

After the glue has set, the shuttering is ready for work again.

rondoplan repair steps

Step 01

Before repairing the damaged spots, the shuttering has to be cleaned of concrete and dirt with the appropriate tools and aids.

Step 02
The Router with rondoplan HMW 301 W2 switchblade groover must be adjusted to the corresponding thickness of the rondoplan plywood repair strips at the depth regulator of the machine. Do a testrun on old shuttering. After the adjustment of the drilling depth and a testrun, drill the hole on the damaged spot.
Step 03

Blow away shavings and dust.
Apply rondoglue or PU glue sparingly at the inside wall of the hole.

Step 04

Put a rondoplan-repair strip in the hole.
Use a piece of hardwood or plywood to fit in the rondoplan-plywood repair strip level.

Step 05

After the glue has set, the shuttering is ready for work again.

TOP