rondoplex - a large range of surfaces
to perfectly match your formwork

rondoplex formwork repair discs are used for repair and regeneration of film-covered shutterings, large-surfaced shutterings and frame shutterings. With rondoplex you can repair damages of the surface of formwork such as scratches, impression marks, drilling holes and cuts easily, quick and at low cost. This helps you reusing your shuttering.

Phenolic
Phenolic

Phenolic
multiplex birch/birch 3-layer, AW 100 gluing, one side covered with approx. 130 g/m2 phenolic film, colour brown, one side finished

Diameters, tolerance +/- 0.05 mm
40.20 mm (Art. No. 40232)
60.20 mm (Art. No. 60232)


Thickness: 3.20 mm tolerance +/- 0.05 mm

G2
G2

G2
multiplex birch/birch, AW 100 gluing, synthetic-coated (PP) with bevel

Diameters, tolerance +/- 0.05 mm
40.20 mm (Art. No. 40264 G2-PP)
60.20 mm (Art. No. 60264 G2-PP)


Thickness: 6.40 mm tolerance +/- 0.05 mm

Sonoboard
Sonoboard

Sonoboard
Special Production: Ecoply-S

Diameters, tolerance +/- 0.05 mm
40.20 mm (Art. No. 40230)
60.20 mm (Art. No. 60230)


Thickness: 3.40 mm tolerance +/- 0.05 mm

3-S
3-S

3-S
Produced in spruce
surface melaminresin in shade yellow underside polished, border rounded

Diameters, tolerance +/- 0.05 mm
40.20 mm (Art. No. 40264 3-S)
60.20 mm (Art. No. 60264 3-S)


Thickness: 6.40 mm tolerance +/- 0.05 mm

Tools to get the job done

HM Switchblade Cylinderhead Drill (Art. No. 400 W)
Diameter: 40.10mm

  • VHM centrepole (Art. No. 4/600 ZSP)
  • HM switchblades (Art. No. 400 RPL)
  • HM side cutter (Art. No. 4/600 WPLV)
  • side cutter screw (Art. No. 4/600 SCHV)
  • switchblade screw (Art. No. 4/600 SCHW)
  • grub screw (Art. No. 4/600 SCHM)
  • Torx screwdriver, large (Art. No. 4/600 SCHDG)
  • Torx screwdriver, small (Art. No. 4/600 SCHDK)
  • rondo-screwdriver, large (Art. No. 4/600 SCHDM)
  • Electronic hand router1
  • More

HM Switchblade Cylinderhead Drill (Art. No. 600 W)
Diameter: 60.10mm

  • VHM centrepole (Art. No. 4/600 ZSP)
  • HM switchblades (Art. No. 600 RPL)
  • HM side cutter (Art. No. 4/600 WPLV)
  • side cutter screw (Art. No. 4/600 SCHV)
  • switchblade screw (Art. No. 4/600 SCHW)
  • grub screw (Art. No. 4/600 SCHM)
  • Torx screwdriver, large (Art. No. 4/600 SCHDG)
  • Torx screwdriver, small (Art. No. 4/600 SCHDK)
  • rondo-screwdriver, large (Art. No. 4/600 SCHDM)
  • Electronic hand router1
  • More

1) Approved Herud KG hand router purchased separately